This bar serves to notify visitors of important updates

Home Packaging Film Inflatable Bag-in-Bag
Inflatable Bag-in-Bag
Inflatable Bag-in-Bag
Inflatable Bag-in-Bag
Inflatable Bag-in-Bag
Inflatable Bag-in-Bag
Inflatable Bag-in-Bag
Inflatable Bag-in-Bag
Inflatable Bag-in-Bag
Inflatable Bag-in-Bag
Inflatable Bag-in-Bag
Inflatable Bag-in-Bag
Inflatable Bag-in-Bag

Made from PE/PA multilayer co-extruded film, Inflatable Bag-in-Bag Packaging helps hold products centrally while an outer air cushion forms around them. Load the item before inflation. KENT supports custom printing and packaging reviews for fruit, cosmetics and bulk orders.

  • KT0315

  • KENT

  • Inflatable Bag-in-Bag Packaging

  • PE/PA Multilayer Co-extruded Film

  • Protective packaging for fruit, makeup, and bottled cosmetics

  • The inner pocket helps keep the item centered, while the outer air cushion provides cushioning. Custom printing is available.

  • KT+Catalog+2026-aidprBpnKjrlnSRqlqlpnmlkm.pdf

Inquire

Inflatable Bag-in-Bag Packaging in Action

Video 1 | Hand Pump Inflation and Product Fit

Watch a hand pump inflate the outer air chamber around the inner product pocket. The clip also shows how two different sample items sit inside their own inflated bags.

Video 2 | Outdoor Drop Demonstration

See an inflated bag-in-bag sample during an outdoor drop, then take a closer look at the bag and its contents after landing. The footage shows how the featured sample performed under the conditions shown.

Made from PE/PA multilayer co-extruded film, Inflatable Bag-in-Bag Packaging combines an inner product pocket with a surrounding air cushion to help hold the item centrally and reduce movement. Load the product before inflation. Transparent versions let you observe its position and fit after inflation.

KENT supports custom requirements and printing, with bag selection for fruit, makeup and bottled cosmetics packaging. Send your product dimensions, weight, printing requirements and estimated quantity to review samples and bulk supply options.

How Bag-in-Bag Packaging Works

This Bag-in-Bag format is loaded before inflation. The inner pocket accommodates the product and helps position it, while the outer inflatable area forms a surrounding cushion. During selection and trial packing, check the central position, product movement, available cushioning space and fit inside the carton.

bag-in-bag-structure-detail.webp
  1. Check the product and bag. Review the item's dimensions, weight, edges and projections, and inspect the bag for damage.

  2. Load the item. Place it in the inner pocket while the bag is uninflated and adjust its position.

  3. Inflate as instructed. Use the nozzle, equipment and operating conditions confirmed for the selected bag. Observe the surrounding cushion and seals.

  4. Fit the outer packaging. Check for product compression, interference with carton closure or excessive movement inside the pack.

The inflation inlet, pressure and removal method depend on the confirmed bag design and instructions. Do not transfer equipment settings directly from another inflatable packaging format.

bag-in-bag-packing-steps.gif

Choose the Right Size for Your Product

Check three sets of dimensions separately:

  • Flat dimensions: The bag's overall dimensions before inflation.

  • Product-fit dimensions: The actual item size the inner pocket can accommodate.

  • Inflated dimensions: The overall size after loading and inflation, used to check carton space.

Flat bag dimensions are not the same as product-fit dimensions. Product thickness, shape and the space required for the inflated cushion all affect compatibility.

Measure the item exactly as it will enter the bag. For a retail-boxed product, provide the complete box dimensions. For an unpackaged item, include handles, caps and other projections. If several SKUs will share one bag size, trial each one. Check the smaller item's position and the cushioning space around the larger item.

Product Specifications and Custom Options

This series uses PE/PA multilayer co-extruded film and supports custom printing. Dimensions, thickness and operating conditions must refer to the selected bag design. Use the following checklist to prepare your enquiry and align the sample with your bulk order.

Item

Product Details and Selection Requirements

Construction

Inner pocket, surrounding inflatable area, product opening and inflation inlet

Size and fit

Product dimensions, flat bag dimensions, usable inner dimensions and inflated dimensions

Film material

PE/PA multilayer co-extruded film

Thickness

Confirm the thickness specification for the selected model

Custom printing

Available on request; artwork, position, process and colours are confirmed for the order

Inflation

Equipment, nozzle, air supply and operating instructions for that bag

Carton fit

Carton inner dimensions, units per carton, product arrangement and cushioning layout

Order and logistics

Quantity per size, uninflated packing quantity, carton dimensions, gross weight and destination

For custom requirements, send your target dimensions, product shape, loading method and carton requirements. For printing, include artwork, the preferred position and colour requirements for KENT to review. Size, construction, inflation interfaces and printing processes are subject to supply capability, the approved sample and order requirements.

When comparing import costs, include carton data for the uninflated goods, the transport method and destination. Inflated display dimensions do not represent the shipment volume, and the unit bag price alone does not show the total delivered cost.

Applications and Packing Considerations

This series includes fruit and cosmetics packaging applications. Consider the following products for a sample trial:

  • Grapes and other fruit: Check loading space, contact points and carton fit against the fruit's shape and packing method.

  • Makeup and cosmetics: Check the fit of the product or retail box, including surface, box-face and corner protection requirements.

  • Bottled cosmetics: Review the bottle body, cap, projections and position after inflation. Assess the container's own seal and any additional protection needed.

Trial each SKU when sharing a bag format. For retail-boxed items, select against the complete boxed dimensions.

bag-in-bag-cosmetic-bottle-application.webp

Final suitability depends on the item's shape, weight, vulnerable areas and shipping conditions. Sharp edges, heavier items, containers that may leak and sensitive finishes may require additional protection or another packaging format. Check ESD requirements separately for electronic components; transparency does not establish anti-static performance.

For fruit applications, confirm separately whether the material and bag design are suitable for direct food contact; a product image does not establish this. Trial the complete pack, including your intended outer packaging. Check for compression, movement inside the carton and contact with sharp points, then assess the pack against your actual transport requirements.

bag-in-bag-packaging-applications.webp

Bag-in-Bag vs Air Column Bags and Rolls

Format

Main Difference

What to Check

Inflatable Bag-in-Bag Packaging

Load the item into the inner pocket before inflating the surrounding cushion

Product-fit dimensions, position after inflation and carton space

Air Column Bag

A formed bag uses an air-column structure around the item

Bag shape and column construction in relation to the product

Air Column Roll

Air-column roll material forms a wrapping solution

Roll width, cut length and wrapping method

Consider Bag-in-Bag Packaging when you want a preformed product pocket and surrounding cushioning created after loading. Review the bag and roll alternatives when your application calls for a specific formed air-column bag or a roll-based wrapping method.

Compare the actual item, packing station, carton and transport requirements. Material specifications, equipment settings and load ratings are not interchangeable between constructions.

Samples and Bulk Orders from KENT

KENT provides supply-option reviews and selection support for Bag-in-Bag Packaging. Send product photographs, dimensions, weight, estimated quantity and destination to establish the suitable format and operating requirements before confirming a bulk order.

During the sample stage, check loading and removal, the product's position and surrounding cushion after inflation, compatibility with your equipment, and the complete pack's fit and transport requirements. See our Free Sample Service for sample-request details.

Before bulk ordering, confirm the bag specification, sample version, quantity, packing method and inspection requirements. MOQ, sample arrangements and lead time are subject to the selected solution and quotation.

Frequently Asked Questions

What material is Bag-in-Bag Packaging made from?

This series uses PE/PA multilayer co-extruded film. Confirm the thickness and bag specifications for the selected model. Review the item's dimensions, weight, contact requirements and actual packing conditions when selecting a format.

Can Bag-in-Bag Packaging be custom printed?

Yes. This series supports custom requirements and printing. Send your artwork, preferred print position, colour requirements and estimated quantity for review. The printing process, print area, cost and MOQ are subject to the agreed solution and quotation.

Do I load the product before inflating the bag?

Yes. The Bag-in-Bag format on this page is loaded before inflation. Place the item in the inner pocket, then inflate the surrounding cushion. Confirm the product opening, inflation inlet and removal steps with the actual sample before bulk use, rather than applying the sequence used for another bag design.

Can one bag size fit different products?

Trial each product. Similar length and width do not establish compatibility: thickness, weight and projections can change the result. Check each SKU's loading space, position after inflation and fit inside the carton. Flat bag dimensions alone are not enough to select a shared size.

Can I use my existing Air Column Bag inflation equipment?

First check whether the equipment model, nozzle and air-supply control suit the selected bag. Send equipment photographs or the model number so the operating conditions can be reviewed with the sample. A similar appearance does not confirm that the same settings can be used.

Is Bag-in-Bag Packaging reusable?

Reuse depends on the closure, inflation design, removal method and condition after use. Tell KENT if you need packaging for returns or repeated handling so the relevant design and sample can be assessed.

Can the bag be used as the outer shipping package?

Confirm this against the bag design, shipping method and carrier requirements. A transparent inflated bag shown in a product image does not establish suitability as an outer shipping package. Include the carton or other outer packaging in sample evaluation and assess the complete pack's fit and transport performance.

What are the MOQ and lead time?

MOQ and lead time depend on the bag design, custom requirements and order quantity. Send your product details, estimated quantity per size, printing requirements and destination so KENT can check the minimum order quantity and lead time. The confirmed sample, specification and quotation define the final supply terms.

Request a Bag-in-Bag Packaging Quote

Send your product's length × width × height, weight, photographs, estimated quantity and delivery destination. For printing, include your artwork and intended appearance. If you have selected a carton or already use inflation equipment, include the carton inner dimensions and equipment model to help KENT review bag fit, printing, operation and packing requirements.

Request a Bag-in-Bag Packaging Quote

Related Products